Netgear AC1200 router is one of the most prominent wireless routers, which enables you to use internet on all the computer systems and devices of your office or house without using any network wires. However, you have to attach your Netgear router with your desktop or laptop with the help of an ethernet wire once for Netgear AC1200 Router Setup. Once the installation process has been done completely, then you can disconnect the Ethernet wire and setup your desktop or laptop to the network with the wireless adapter.
Installation CD Lost! No Worries for Netgear AC1200 Router Setup
Here are some of the best and easy steps in order to go for Netgear AC1200 router setup without CD.
Step 1: First of all, shut down your computer system. After that, turn off your modem as well.
Step 2: Look for the ethernet wire that is connected with your desktop or laptop and modem. Try to disconnect the ethernet wire from your laptop or desktop.
Step 3: Try to link up the ethernet wire connect it to the port that is placed on the back of your Netgear router.
Step 4: Now to configure a Netgear wireless router without the CD, use the ethernet wire that came along with your Netgear router. Now, insert it in the first LAN port that is just located back of your Netgear router. Take the other end of the Ethernet wire and connect it to the back of your personal computer. Insert it at the exact where the ethernet wire that you have unplugged.
Step 5: Connect the modem to a power source and then turn it on. Now, wait for some time.
Step 6: Now try to fix a Netgear wireless router without the CD, so connect the Netgear router with a power source. Then, wait for a few seconds.
Step 7: Start the computer system and check if the lights on your router’s front are blinking or not. All the four lights in front of your router must be turned on.
In case, the third light is not on, then you must take a look at the wire that is connecting the modem and the router. Also, ensure that the connection is secured and your modem is also power on. This is one of the most important steps to understand how to install Netgear AC1200 router without the CD.
In case, the fourth light is not on, then you must ensure that there is no issue in the connection between your computer system and the router. Also, check either your PC is turned on or not and the connection with your desktop or laptop and router is secure.
Step 8: Now to setup Netgear wireless AC1200 router without the CD, launch your web browser i.e., Google Chrome, Mozilla Firefox, or Internet Explorer and visit www.routerlogin.net setup.
Step 9: A login window will pop up in front of you and you will have to enter the username and passwords in the respective sections. Type admin in the username field and password in the section of password. You can change the user SSID name and password, after the complete setup.
This is the default SSID network and passphrase setting of Netgear AC1200 router. In case, you are not able to login after entering these credentials, then Click Here.
Step 10: After logging in you will be able to connect with the router and setup wizard will be launched.
We hope that this particular blog section on how to setup Netgear AC1200 router without CD will prove quite beneficial for you. Somehow, if you still face any problem please get in touch with us through 1-888-927-4505.